Logo

P372F Engine Code Repair

Meaning of P372F engine trouble code is a kind of powertrain trouble code and when the check engine light comes P372F code on the first you should check is the gas cap. Pull over, retighten it, and take a look at the cap to see if it has any cracks in it. Continue driving and see if the check engine light turns off. Alternately, you can purchase a gas cap for about $3 at an auto parts store. All you need to do is take the old one off and screw on the new one. If you've already made it to the store, you might as well just replace it. While not car-threatening, it's good to take care of this right away to improve gas mileage.

P372F Fault Symptoms :

  1. Check engine light comes on
  2. Engine stalling or misfiring
  3. Engine performance issues
  4. Car not starting

If one of these reasons for P372F code is occuring now you should check P372F repair processes.
Now don't ask yourself; What should you do with P372F code ?
The solution is here :

P372F Possible Solution:

P372F Engine

Air Conditioning Pressure Sensor (ACP) Insufficient Pressure Change Each time the A/C clutch engages, the PCM is looking for a pressure change in the refrigerant. If the change in pressure is outside of the calibration the DTC will set. A/C system mechanical failure Open ACP or VREF circuit A/C sensor damaged A/C system electrical failure A/C clutch always engaged Verify A/C system function, including refrigerant charge.

P372F Code Meaning :

P
OBD-II Diagnostic Powertrain (P) Trouble Code For Engine

3
Ignition System Or Misfire

7
Fuel Temperature Sensor B Circuit Range/Performance

2
Engine Shutoff Solenoid Malfunction

f

The poor running symptoms are consistent with a MAP sensor malfunction. In addition, in some cases, a bad MAP sensor will not throw a code. Again, the ELD code likely represents a separate wiring issue.

P372F OBD-II Diagnostic Powertrain (P) Trouble Code Description

P372F engine trouble code is about .

Main reason For P372F Code

The reason of P372F OBD-II Engine Trouble Code is Fuel Temperature Sensor B Circuit Range/Performance.

P372F code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.